SDS

Dalton Enterprises, Inc. Product: Latex-ite™ 2X Crack Filler
Phone: [phone] SDS Date: 12/18/2017
Page 3 of 6 Latexite 2X Crack Filler
Section VII – HANDLING AND STORAGE S
Precautions for Safe Handling: Store in a dry area, avoid eye contact and wash thoroughly after handling
Conditions for Safe Storage, Including Incompatibilities: Keep container closed and upright to prevent
leakage. Store in a cool, dry, ventilated area. Avoid freezing. Keep container upright to prevent leakage.
Section VIII – EXPOSURE CONTROLS / PERSONAL PROTECTION S
Personal Exposure Guidelines
Component
ACGIH TWA (mg/m³)
OSHA PEL (TWA) (mg/m3)
Petroleum Asphalt
0.5 mg/m³
-
Engineering Controls: Ensure adequate ventilation
Individual Protection Measures
Eyes/Face: Safety goggles
Skin: Gloves
Respiratory: None required if good ventilation is maintained. This product is an emulsified,
encapsulated mixture which greatly reduces the likelihood of exposure to hazardous particles.
Hygienic controls: Wash thoroughly with soap and water before eating or drinking. Wash
contaminated clothing.
Section IX – PHYSICAL AND CHEMICAL PROPERTIES S
Appearance: Dark brown to black liquid Upper Explosive Limit: N/A
Physical State: liquid Lower Explosive Limit: N/A
Odor: Asphaltic odor Vapor Pressure: Nearly equal to water
Odor Threshold: N/A Vapor Density: Heavier than air
pH: 6.0 – 8.0 Specific Gravity: 1.05
Melting Point: N/A Solubility In Water: Easily dispersible
Boiling Point: N/A Partition Coefficient (n-octanol/water): N/A
Flash Point: N/A Auto Ignition Temperature: N/A
Evaporation Rate: N/A Decomposition Temperature: N/A
Flammability: N/A Max Voc: < 10g/L
Section X – STABILITY AND REACTIVITY S
Reactivity: None known under normal conditions
Stability: Stable
Hazardous Reactions: None known under normal conditions
Conditions to avoid: Keep from freezing and extreme heat
Incompatibility: Strong oxidizers
Hazardous Decomposition Products: Combustion may yield fumes, smoke, carbon monoxide and carbon
dioxide.