Specification

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Phone [phone] • Fax [phone] • www.latexite.com
Revised 09/28/16
TECHNICAL DATA SHEET
Latex•ite
®
2X CRACK FILLER
Manufacturer Product#: 2XCFC
UPC#: 090932312630
Appearance:
Brown Liquid, dries black.
Maximum VOC:
Less than 50 g/l
Application Temperature:
55º F and rising.
Specific Gravity:
.95-1.05
Viscosity:
4,000-7,000 cps
Weight Per Gallon:
7.8-8.6
Color:
Brown
Consistency:
Thick liquid
Boiling Point:
>212º F
Cure Time (50% relative humidity, 70º F):
24-48 hours.
Freeze ability:
Do not allow to freeze.
Container Size & Weight:
1 gallon, approximately 8.2 lbs. per gallon
Latex·ite® 2X Premium Blacktop Crack Filler is a specially formulated Acrylic Latex Rubber ... Vinyl Polymer
Blend that provides extended life & greater durability than ordinary cold pour formula crack fillers. Our fast dry
additive accelerates drying & curing time. For blacktop cracks up to 1/2" wide.
 Premium filler for cracks up to 1/2" wide.
 Fortified with latex and asphalt binders to strengthen bond.
 Just clean crack, shake, snip open and squeeze into crack.
 Low VOC Formula / Easy soap and water clean up.
*Note: Product dries black…is brown only in liquid form.
Latex·ite® 2X Premium Blacktop Crack Filler is a simple and clean process. Before applying the product, it is
important to thoroughly clean out the crack and remove any loose debris. Use a screwdriver and whisk broom.
Rinsing the crack and allowing it to dry will give you the best results.
Latex·ite® 2X Premium Blacktop Crack Filler is easy to use. Remove all dirt, grass, old crack filler and debris
from crack to be filled. Shake well before using. Pre-mixed, DO NOT DILUTE.
Cut tip to a size slightly smaller than the width of the crack to be repaired. Squeeze/pour crack filler SLOWLY
INTO CRACK.... DO NOT OVERFILL. 2X will self level. Wipe/clean any crack filler residue from crack surface.
Do not apply more than 1/4" thick in any single application.
For deep or large cracks you may fill with sand or backer rod to within 1/4" of the surface before applying 2X
Premium Blacktop Crack Filler. 2X Premium Blacktop Crack Filler will dry to the touch within 30 minutes and
depending on outdoor conditions, should be fully dry within 4-8 hours.
PHYSICAL PROPERTIES & PERFORMANCE
FEATURES
SURFACE PREPARATION
APPLICATION