SDS

ManualsBrandsLatex-ite ManualsAsphalt Repair3.4 Gal. Blacktop Acrylic Grade Driveway Sealer

Dalton Enterprises, Inc. Product: Latex-ite

Acrylic Grade

Phone: (203) 272-3221 SDS Date: 01/10/2019

Page 1 of 7 Latex-ite

Acrylic Grade

SAFETY DATA SHEET

Section I – PRODUCT AND COMPANY IDENTIFICATION

Product Name: Latexite

3.4 Gal. Acrylic Grade Sealer (Blacktop)

Manufacturer Name: Dalton Enterprises, Inc.

Item #: 31780

UPC #: 0 90932 31780 2

Address: 131 Willow Street Cheshire, CT 06410

Telephone Number: (203) 272-3221

24 Hour Emergency Number: (203) 272-3221

U.S. And Canada: (203) 272-3221

Trade Names and Synonyms: Acrylic Copolymer Emulsion

Recommended Use and Restrictions: Blacktop Coatings / Sealant

Product Description: Consumer packaged (ready-to-use) Latex•ite

Acrylic Grade sealer is for asphalt

surfaces. Proper application of ready-to-use emulsified product as applied presents no degree of hazard to the

user. Outdoor use only.

Section II – HAZARDS IDENTIFICATION

Classification

Skin Corrosion/Irritation

Category 2

Serious Eye Damage, Eye Irritation

Category 2B

Label Elements

GHS Pictogram:

Signal Word: Warning

Hazard Statements:

Causes skin irritation

Causes eye irritation

Precautionary Statements – Prevention

Obtain special instructions before use

Do not handle until all safety precautions have been read and understood

Use personal protective equipment as required

Acrylic Grade

Summary of content (7 pages)

PAGE 1
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc. Phone: (203) 272-3221 Acrylic Grade 1 SAFETY DATA SHEET 0 0 B Section I – PRODUCT AND COMPANY IDENTIFICATION Product Name: Latexite® 3.4 Gal. Acrylic Grade Sealer (Blacktop) Manufacturer Name: Dalton Enterprises, Inc. Item #: 31780 UPC #: 0 90932 31780 2 Address: 131 Willow Street Cheshire, CT 06410 Telephone Number: (203) 272-3221 24 Hour Emergency Number: (203) 272-3221 U.S.
PAGE 2
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc. Phone: (203) 272-3221 Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Use only outdoors or in a well-ventilated area Precautionary Statements - Response IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
PAGE 3
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc. Phone: (203) 272-3221 Indication of Immediate Medical Attention and Special Treatment Needed: Treat Symptomatically Section V – FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Dry chemical, carbon dioxide, foam and water fog. Unsuitable Extinguishing Media: N/A Specific Hazards arising From the Chemical: Combustion may yield oxides of carbon, hydrogen sulfide and sulfur oxides.
PAGE 4
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc. Phone: (203) 272-3221 Hygienic controls: Wash thoroughly with soap and water before eating or drinking. Wash contaminated clothing. Section IX – PHYSICAL AND CHEMICAL PROPERTIES Appearance: Black liquid Physical State: Liquid Odor: Mild Acrylic Odor Threshold: N/A pH: 6.0 – 7.
PAGE 5
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc. Phone: (203) 272-3221 Component CAS # IARC NTP OSHA Carbon Black Crystalline Silica 1333-86-4 14808-60-7 2B Group 1 Not Listed Known - NOTE: Crystalline silica in respirable form is carcinogenic to humans. The crystalline silica present is not respirable as this product is supplied. NOTE: Carbon Black in respirable form is carcinogenic to humans. The Carbon Black present is not respirable as this product is supplied.
PAGE 6
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc.
PAGE 7
Product: Latex-ite® Acrylic Grade SDS Date: 01/10/2019 Dalton Enterprises, Inc. Phone: (203) 272-3221 NFPA Rating: Health 1; Fire 0: Reactivity 0 Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe Revision Date: 01/10/2019 Disclaimer/Statement of Liability: THE INFORMATION AND RECOMMENDATIONS PROVIDED HEREIN ARE BELIEVED TO BE ACCURATE AND ARE BASED UPON EXPERIENCE, TESTS, LITERATURE REFERENCES, AND/OR CALCULATIONS.