Specification

ManualsBrandsLatex-ite ManualsKitchen1-Gal. Super Patch

______________________________________________________________________________

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410

Phone 800-851-5606 • Fax (203) 271-3396 • www.latexite.com

Revised 1/26/09

TECHNICAL DATA SHEET

Latex•ite

SUPER PATCH

Manufacturer Product#: 31916

UPC#: 090932319165

PHYSICAL PROPERTIES & PERFORMANCE

Appearance:

Black aggregate mixture.

Maximum VOC:

Less than 10 g/L

Application Temperature:

n/a

Specific Gravity:

1.3-1.5

Viscosity:

n/a

Weight Per Gallon:

10.8-11.6 lbs. per gallon

Color:

Black

Consistency:

Solid

Boiling Point:

900º F

Cure Time (50% relative humidity, 70º F):

Immediate once compacted

Freeze ability:

n/a

Container Size & Weight:

1 gallon, 11 lbs.

Latex•ite

SUPER PATCH is a stone asphalt patch for driveways and pavements. It is recommended for POTHOLES, large

cracks and joints. It can be used on both asphalt and concrete and is designed to be used year-round. Latex•ite

SUPER PATCH

contains asphalastic binders which give it maximum adhesion and longer life. .

 Black, Texturized Compound

 Stone Adhesive Mix.

 Traffic ready immediately.

 Ready to use

 

 



Latex•ite

SUPER PATCH is easy to use. It is important to remember that Latex•ite

SUPER PATCH works on compaction and

must have sidewalls to work properly. If it is put in a depression with no sidewalls, it will not work. We recommend square

cutting the vertical sides of the crack or hole and remove all loose debris. Next sweep or blow out the pothole. Allow to dry. 

Fill the hole with Latex•ite

SUPER PATCH to a height of ½" above the area. Compact the hole using a tamper or heavy, flat

item such as a cinderblock. You may also put a piece of plywood over the area and drive over it with your car for maximum

compaction. It is ready for traffic once it's been fully compacted. If you plan to seal over the repaired area, we recommend you

wait 2 weeks prior to sealing. There are oils in the product and you can help speed up the cure rate by sprinkling sand or Portland

APPLICATION

FEATURES

SURFACE PREPARATION

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA SHEET Latex•ite® SUPER PATCH Manufacturer Product#: 31916 UPC#: 090932319165 PHYSICAL PROPERTIES & PERFORMANCE Appearance: Black aggregate mixture. Application Temperature: n/a Viscosity: n/a Color: Black Boiling Point: 900º F Freeze ability: n/a Maximum VOC: Less than 10 g/L Specific Gravity: 1.3-1.5 Weight Per Gallon: 10.8-11.6 lbs. per gallon Consistency: Solid Cure Time (50% relative humidity, 70º F): Immediate once compacted Container Size & Weight: 1 gallon, 11 lbs.
PAGE 2
cement over the repair. Remember, if the repaired area is not setting up, it's most likely because it has not been compacted enough. PRECAUTIONS Allow all repaired surfaces to cure 2 weeks prior to sealing. When transporting this product, ensure that the container is secured and the lid is secure. Do not allow the container to tumble as this may loosen the lid and allow leakage to occur. Do not transport on passenger seats or inside the passenger compartment of any vehicle.