MSDS

Page 2 of 4 TROWEL PATCH
APPEARANCE & ODOR: Thick black mixture
BOILING POINT: 212°F
VAPOR PRESSURE: 17mm Hg
SPECIFIC GRAVITY: 1.20
SOLUBILITY IN WATER: Dispersed in water insoluble when dry.
EVAPORATION RATE: N/A
PH: 7.5-9.5
PHYSICAL STATE: Liquid/paste
FREEZING POINT: 32°F
%VOLATILE (by Wt.): 60%
VAPOR DENSITY: 1
THRESHOLD ODOR: N/A
WATER/OIL DIST. COEFFIECIENT: N/A
MAX VOC: Less than 10 g/L
Flammability Classification: N/R
Flash Point (method used): Greater than 210°F. TCC
Flammable Limits: LEL: N/A UEL: N/A
Combustion Products: Hydrocarbon compounds, CO, and CO
2
.
Extinguishing Media: Water, Foam, dry chemical, CO
2
.
Special Fire Fighting Procedures: Cool exposed containers to prevent steam pressure buildup. Wear self-
contained breathing equipment.
Unusual Fire and Explosion Hazards: Closed containers may build up pressure from heat. Dust residues can
potentially form explosive mixtures with the air. Use adequate ventilation with clean-up procedures. Burning liquid
can float on water and spread further.
UN/NA/PIN#: N/A
NFPA Rating: Health 1; Fire 1; Reactivity 0
Impact Sensitive: No
Static Sensitive: No
Explosive Power: N/A
Burning Rate: N/A
Threshold Limit Value: See Section II
Routes of Entry: Skin, eyes, inhalation, ingestion.
Effects of Overexposure:
Eyes: May cause eye irritation which in the absence of recommended first aid may result in severe
burns.
Inhalation: May cause headache and nausea. Prolonged and repeated inhalation may be harmful to
respiratory system.
Skin: May cause irritation of skin or more harmful effects. When not washed off or when accentuated by
sunlight, skin contact with the product or the product volatiles may result in burns which may be
severe.
Section III – PHYSICAL DATA
Section IV – FIRE AND EXPLOSION HAZARD DATA
Section V – HEALTH HAZARD DATA