Specification

ManualsBrandsLatex-ite ManualsKitchen2-Gal. Trowel Patch

______________________________________________________________________________

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410

Phone 800-851-5606 • Fax (203) 271-3396 • www.latexite.com

Revised 1/26/09

TECHNICAL DATA SHEET

Latex•ite

TROWEL PATCH

Manufacturer Product#: 32051

UPC#: 090932320511

PHYSICAL PROPERTIES & PERFORMANCE

Appearance:

Thick Brown Mixture, dries black.

Maximum VOC:

Less than 10 g/l

Application Temperature:

55º F and rising.

Specific Gravity:

1.15-1.25

Viscosity:

5,000-10,000 cps

Weight Per Gallon:

10.1-10.8 lbs. per gallon

Color:

Brown

Consistency:

Thick mixture

Boiling Point:

>212º F

Cure Time (50% relative humidity, 70º F):

24-48 hours.

Freeze ability:

Do not allow to freeze.

Container Size & Weight:

2 gallon pail, 22.4 lbs. per pail

Latex•ite

TROWEL PATCH

is a smooth asphalt repair product. It is designed to repair medium to large cracks, smooth out

rough spots and fill minor depressions.

 2 gallon

 Patented black, cement-like formula.

 For rough spots, depressions, low spots and medium/large cracks.

 No-stir formula. Just trowel and smooth over troubled area.

 Allow to fully cure prior to sealing.

 Low VOC Formula.

Prior to using Latex•ite

TROWEL PATCH

it is important to thoroughly clean the area. Sweep out any loose debris and rinse.

Once the area is dry, you are ready to apply.

Latex•ite

TROWEL PATCH

is designed to repair medium-sized cracks and to smooth out rough spots and minor depressions

on asphalt driveways. Prior to using Latex•ite

TROWEL PATCH

it is important to thoroughly clean the area. Sweep out any

loose debris and rinse. Once the area is dry, you are ready to apply. Just trowel onto troubled area. Latex•ite

TROWEL PATCH

dries from the top down so it is important not to apply it too thick. We recommend applying no more than two ½" lifts

consecutively. If the depression or crack is deeper than ½", apply the first layer and let that set up and cure thoroughly prior to

applying another layer. Once you finish applying, ensure that it is completely dried and cured prior to sealing.

APPLICATION

FEATURES

SURFACE PREPARATION

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA SHEET Latex•ite® TROWEL PATCH® Manufacturer Product#: 32051 UPC#: 090932320511 PHYSICAL PROPERTIES & PERFORMANCE Appearance: Thick Brown Mixture, dries black. Application Temperature: 55º F and rising. Viscosity: 5,000-10,000 cps Color: Brown Boiling Point: >212º F Freeze ability: Do not allow to freeze. Maximum VOC: Less than 10 g/l Specific Gravity: 1.15-1.25 Weight Per Gallon: 10.1-10.8 lbs. per gallon Consistency: Thick mixture Cure Time (50% relative humidity, 70º F): 24-48 hours.
PAGE 2
PRECAUTIONS Avoid applying when rainfall is likely within 24 hours of application time. Avoid applying when temperatures drop below 55º F. Allow all repaired surfaces to cure 24 hours prior to sealing. When transporting this product, ensure that the container is secured and the lid is secure. Do not allow the container to tumble as this may loosen the lid and allow leakage to occur. Do not transport on passenger seats or inside the passenger compartment of any vehicle.