Specification

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Phone [phone] • Fax [phone] • www.latexite.com
Revised 1/26/09
TECHNICAL DATA SHEET
Latex•ite
®
10.1 OZ. CRACK REPAIR TUBE
Manufacturer Product#: 42376
UPC#: 090932423763
Appearance:
Thick Black Liquid
Maximum VOC:
Less than 25 g/l
Application Temperature:
55º F and rising.
Specific Gravity:
1.10
Viscosity:
4,000-7,000 cps
Weight Per Gallon:
n/a
Color:
Black
Consistency:
Black Mastic Asphalt
Boiling Point:
380°
Cure Time (50% relative humidity, 70º F):
24-48 hours.
Freeze ability:
Do not allow to freeze.
Container Size & Weight:
10.1 oz. tube
Latex•ite
®
10 OZ. CRACK REPAIR TUBE is specially formulated using a combination of pure asphalts and gilsonites to ensure
rapid drying and maximum durability.
• Fills cracks and joints up to ½"
• Fills up to 32 feet with ¼" bead
• Fills asphalt cracks and expansion joints
• Low VOC Formula
Latex•ite
®
10 OZ. CRACK REPAIR TUBE is a simple and clean process. Before applying the product, it is important to
thoroughly clean out the crack and remove any loose debris. Use a screwdriver and whisk broom. Rinsing the crack and allowing
it to dry will give you the best results.
To apply, cut tip on slant to size of bead desired and puncture inner seal. Apply only to clean, dry surface. Insert tip into cracks
forcing patching material well into openings. Apply to within 1/8" of surface. Do not use in cracks more than 1/2" wide. Allow to
cure prior to sealing. Store in above freezing temperatures. Apply when surface and air temperature are at least 55 degrees F.
Avoid applying when rainfall is likely within 24 hours of application time. Avoid applying when temperatures drop below 55º F.
Allow all repaired surfaces to cure 24 hours prior to sealing. For crack fillers you should wait 24 hours. If the crack filler is firm
PRECAUTIONS
APPLICATION
SURFACE PREPARATION
FEATURES
PHYSICAL PROPERTIES & PERFORMANCE