Specification

ManualsBrandsLatex-ite ManualsKitchen3.5 Gal. Super Patch

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410

Phone 800-851-5606 • Fax (203) 271-3396 • www.latexite.com

Revised 09/28/16

TECHNICAL DATA SHEET

Latex•ite

SUPER PATCH

Manufacturer Product#: 4SP

UPC#: 090932119161

Appearance:

Black aggregate mixture

Maximum VOC:

<10 g/l

Application Temperature:

N/A

Specific Gravity:

1.3-1.5

Viscosity:

N/A

Weight Per Gallon:

10.8-11.6 lbs. per gallon

Color:

Black

Consistency:

Solid

Boiling Point:

900º F

Cure Time (50% relative humidity, 70º F):

Immediate once compacted

Freeze ability:

N/A

Container Size & Weight:

3.5 gallons, approx. 45 lbs.

Latex•ite

SUPER PATCH

is a stone asphalt patch for driveways and pavements. It is recommended for POTHOLES, large

cracks and joints. It can be used on both asphalt and concrete and is designed to be used year-round. Latex•ite

SUPER PATCH

contains asphalastic binders which give it maximum adhesion and longer life. .

•

Black, stone aggregate formula.

•

For potholes, joints and large cracks.

•

Contains asphalastic binders for maximum adhesion to sidewalls.

•

Just pour and tamp ... traffic ready immediately.

•

Year-round formula.

•

New low VOC formula (<.1%) complies with all State & Federal Air Regulations.

Latex•ite

SUPER PATCH

is easy to use. It is important to remember that Latex•ite

SUPER PATCH

works on compaction

and must have sidewalls to work properly. If it is put in a depression with no sidewalls, it will not work. We recommend square

cutting the vertical sides of the crack or hole with a chisel and remove all loose debris. Next sweep or blow out the pothole.

Allow to dry.

Fill the hole with Latex•ite

SUPER PATCH

to a height of ½" above the area. Compact the hole using a tamper or heavy, flat

item such as a cinderblock. You may also put a piece of plywood over the area and drive over it with your car for maximum

PHYSICAL PROPERTIES & PERFORMANCE

FEATURES

SURFACE PREPARATION

APPLICATION

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA SHEET Latex•ite® SUPER PATCH® Manufacturer Product#: 4SP UPC#: 090932119161 PHYSICAL PROPERTIES & PERFORMANCE Appearance: Black aggregate mixture Application Temperature: N/A Viscosity: N/A Color: Black Boiling Point: 900º F Freeze ability: N/A Maximum VOC: <10 g/l Specific Gravity: 1.3-1.5 Weight Per Gallon: 10.8-11.6 lbs. per gallon Consistency: Solid Cure Time (50% relative humidity, 70º F): Immediate once compacted Container Size & Weight: 3.5 gallons, approx. 45 lbs.
PAGE 2
compaction. It is ready for traffic once it's been fully compacted. If you plan to seal over the repaired area, we recommend you wait 2 weeks prior to sealing. There are oils in the product and you can help speed up the cure rate by sprinkling sand or Portland cement over the repair. Remember, if the repaired area is not setting up, it's most likely because it has not been compacted enough. For deep repairs, tamp the bottom 3 inches, fill, tamp next 3 inches, etc. working your way up to the surface.