Specification

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Phone [phone] • Fax [phone] • www.latexite.com
Revised 09/28/16
TECHNICAL DATA SHEET
Latex-ite® ULTRA SHIELD™ DRIVEWAY SEALER
Manufacturer Product#: 70691
UPC#: 090932706910
Appearance:
Thick brown liquid. Dries black.
Maximum VOC:
Less than 25 g/L
Application Temperature:
55º F and rising.
Specific Gravity:
1.3-1.5
Viscosity:
5,000-10,000 cps
Weight Per Gallon:
10.8-11.6 lbs. per gallon
Color:
Brown in liquid state. Dries black.
Consistency:
Thick liquid.
Boiling Point:
>212º F
Cure Time (50% relative humidity, 70º F):
24-48 hours.
Freeze ability:
Do not allow to freeze.
Container Size & Weight:
4.75gallons, Approximately 55 lbs.
Latexite
®
Ultra Shield
®
Driveway Filler Sealer is one of our top of the line high performance asphalt driveway sealers. Ultra
Shield
®
is formulated using an advanced technology that incorporates a flexible polymer system so not only will the sealer adhere
to your driveway better it will adhere to itself better…extending the life of your asphalt investment!
Features:
 10 Year Warranty
 Ultra Flex Polymers for max flexibility
 UV Protection – stays black and won’t fade/dull
 Advanced EZ-GEL™ Formula … save time & effort
 Non-Skid Formula
 Low VOC Formula / Easy soap & water clean-up
 Apply with Seal Right Squeegee (Roller is wrong applicator and voids warranty)
*Note: Product dries black…is brown only in liquid form.
Coverage rates vary depending upon the condition of the existing blacktop. Smooth & previously sealed driveways will
average 400-500 square feet per pail. Rough & unsealed surfaces will average 300-400 sq. ft. per one 4.75 gallon pail.
Rough / road-grade asphalts with larger aggregate can cause lower than normal coverage rates. Thin coats are recommended
as thick coats will result in uneven coverage, tracking, and curing problems. A second coat can be applied 24 hours after first
application.
PHYSICAL PROPERTIES & PERFORMANCE
FEATURES
COVERAGE