Instructions / Assembly

Seal
Once you've poured a bead across the driveway, use your squeegee to pull the sealer back and forth, in a moon
shape, across the driveway starting near your house and working down towards the street. (Maintain a wet bead or
edge to avoid streak marks.) See photos below. Remember to drag squeegee back and forth ... do not push.
Apply pressure to leave a thin coat. Two thin coats are better than one thick coat. As more sealer is required, pour
it next to where you left off to slightly overlap (Maintain a wet bead or edge to avoid streak marks). Continue
sealing project in one day if possible and without stopping to avoid your driveway sealer curing at a different
rate... possibly leaving different shades of color.
Use our 18” Seal Right Squeegee properly to get professional results:
...going from left to right
...going from right to left
Right hand on top twisting towards
Left hand on top twisting towards
your chest, left hand on bottom
your chest, right hand on bottom
applying down pressure.
applying down pressure.