Specification

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Phone [phone] • Fax [phone] • www.latexite.com
Revised 09/28/16
TECHNICAL DATA SHEET
Latex•ite
®
AIRPORT GRADE
®
DRIVEWAY SEALER
Manufacturer Product#: 73066
UPC#: 090932730663
Appearance:
Thick brown liquid. Dries black.
Maximum VOC:
Less than 25 g/L
Application Temperature:
55º F and rising.
Specific Gravity:
1.3-1.5
Viscosity:
5,000-10,000 cps
Weight Per Gallon:
10.8-11.6 lbs. per gallon
Color:
Brown in liquid state. Dries black.
Consistency:
Thick liquid.
Boiling Point:
>212º F
Cure Time (50% relative humidity, 70º F):
24-48 hours.
Freeze ability:
Do not allow to freeze.
Container Size & Weight:
4.75gallons, Approximately 55 lbs.
Latex·ite
®
Airport Grade
®
Driveway Filler Sealer is an asphalt emulsion based driveway sealer designed to beautify and
protect your driveway. Airport Grade
®
is an advanced formula that contains polymer additives for strength and flexibility.
Features:
 4 year warranty
 Polymer fortified for strength and flexibility
 Fills hairline cracks
 Low VOC formula, easy soap and water clean up
 Apply with Seal Right Squeegee (Roller is wrong applicator and voids warranty)
*Note: Product dries black…is brown only in liquid form.
Coverage rates vary depending upon the condition of the existing blacktop. Smooth & previously sealed driveways will
average 400-500 square feet per one 4.75 gallon pail. Rough & unsealed surfaces will average 300-400 sq. ft. per one 4.75
gallon pail. Rough / road-grade asphalts with larger aggregate can cause lower than normal coverage rates. Thin coats are
recommended as thick coats will result in uneven coverage, tracking, and curing problems. If needed, a second coat can be
applied 24 hours after first application.
PHYSICAL PROPERTIES & PERFORMANCE
FEATURES
COVERAGE