Instructions / Assembly
Español a termino del documento
All Latex
●
ite
®
asphalt driveway sealers are time-tested and performance proven. Professional grade
formulas that are user friendly for the Do-It-Yourselfer. Latex
●
ite
®
driveway sealing products go on easier /
faster, perform better and look the BEST! So use Latex
●
ite
®
asphalt driveway sealers and do it right the first
time. When you Do It Yourself you are ensured of a high quality product from Dalton, The Leaders in
Driveway Maintenance…since 1945
®
.
Once the asphalt is repaired and cleaned (and any gas or oil spot have been primed) ... you are ready to seal.
DON'T SEAL OVER PROBLEMS! Apply only if weather is clear and dry. DO NOT APPLY when rain or fog is
imminent or likely within 48 hours. Also, do not apply very late in the day. For best results both surface and air
temperature should be above 55°F and rising for proper adhesion. Early Spring or late Fall applications will most
likely result in the sealer not performing well.
Stir
Premix 1/2 of the pails you expect to use…you can even have an empty 5gal pail there
And mix them all back and forth – this is called ‘boxing or batching’.