Use and Care Manual

PAYCLOCK & PC600 USER’S GUIDE
20
• When finished, press the center of the screen and then press
the back 2 button until you have returned to the default
screen.
Reset
Use caution when selecting this menu item. This menu item will reset
the entire terminal to the manufacturer default settings.
All settings, administrators, supervisors, employees and data
will be cleared; you can not recover this information.
To enter into administrator mode at the PC600, press the Admin
button. The Enter PIN screen will display.
• Using the numeric key pad enter the administrator PIN
number and press Enter.
• The Administrator Main Menu screen will display.
• Press Reset. The Clock Reset screen will display.
• Press the Reset Clock button.
• At the confirmation screen press Yes if you are sure you wish
to reset and clear the terminal.
• The terminal will reboot and restart as if it were a new
terminal that had never been used.
WARNING: Use caution when selecting this menu item. This menu
item will reset the entire terminal to the manufacturer default settings.
All settings, administrators, supervisors, employees and data will be
cleared; you can not recover this information