Use and Care Manual

PAYCLOCK & PC600 USER’S GUIDE
69
The Admin functions on the terminal include; Device Information,
Network Setup, Date/Time Setup, Error Log and Reset.
Power Save - Power Save Mode
The power save option dims the PC600’s display after no activity for
30 seconds. Note: This option is enabled by default, it is not
recommended to disable this option.
Feature Settings
This area is used to enable/disable the Amounts and Department
Transfers button on the terminal and also how long the registrations
are stored on the PC600.
Allow Amounts: Select whether the “Enter Amounts” button will
display on the terminal’s touch screen. Note: The Enter Amounts
button will not display on the terminal’s touch screen if this option
is disabled.
Decimals: Select how many decimal places will be used if the
Allow Amounts option is enabled.
Allow Transfers: Select whether the “Transfer Depts” button will
display on the terminal’s touch screen. Note: The Transfer Depts
button will not display on the terminal’s touch screen if this option
is disabled.
Maximum days to store registrations on terminal: Select how
many days to store punches in the terminal’s memory. The default
setting is 90 days.
Update Settings
This area is used to enable/disable sending the time/date and worked
hours to the terminal.
Send Date/Time to terminal when polling or updating: Select
whether to send the date/time to the terminal when polling or
updating. This option is enabled by default.