Use and Care Manual

PAYCLOCK & PC600 USER’S GUIDE

PC600 WAN Installation

• At the remote site install mount and connect the PC600

terminal to the network.

• With the PC600 powered up and connected to the network,

press the Admin button and enter the administrator PIN

(99999).

• The Administrator Main Menu will display. Press the

Network Setup button.

• The Network Setup screen will display. If using a “static” IP

address at the terminal select DHCP = Off. Set the

terminal’s IP, Subnet Mask and Gateway addresses. If you are

using DHCP select DHCP = On. The IP, Subnet Mask and

Gateway Address will automatically be set when the DHCP

setting is On.

• Press the Define Host button, the Define Host screen will

display.

• Press the Host IP button and enter the IP Address for the

computer where the PayClock database server resides and

press OK.

Note: Use the Server Summary or Connection Info print out for

the PayClock database server’s IP address.

• Under Live Sync press the Enable button, the Sync Now

button will display.

• Press the Sync Now button, the screen will turn orange with

“Downloading Latest Data From Host. Please Wait…”.

• When finished verify the connection.

• Press the Admin button and enter the administrator PIN

(99999).