Use and Care Manual

PAYCLOCK & PC600 USER’S GUIDE
85
• Press the Host IP button.
• Enter the IP address configured at the computer (i.e.
10.0.1.1).
• Press the back 2 button until you have returned to the
default screen.
Step #4 - At the PayClock software
• Open the PayClock software and click on the Terminal
Manager tab. (Note: The Auto Discovery will not work for
this scenario.)
• Click the Add Terminal button and select PC600.
• Enter the IP address given to the PC600 in the Device IP
Address field.
• Enter the IP address given to the computer in the Server IP
Address field.
• Click Save.
• Click the Test Connection button and verify the
communications.
More Information:
To access the NIC settings follow the steps for the appropriate
Windows operating system:
Windows XP
• Click Start > Control Panel > Network Connections.
• Right click on the desired connection in the list and select
Properties.
• Select the Internet Protocol (TCP/IP) item.
• Click the Properties button.
• Choose Use the following IP address.
• Enter the values outlined in this document.
• Click OK and then click Close.