Installation & Assembly

1
Installation Instructions for
4 Light Up Light Pendant
PENDANT
Feed the fixture wires through the center of the fixture frame and tightly screw the socket assembly onto the fixture frame.
Install the threaded nipple onto the socket assembly.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install the shade onto the threaded nipple and secure it place with the washer and finial.
1
2
1A
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
3
LAMP
SHADE
3
FINIAL
WASHER
THREADED NIPPLE
SOCKET ASSEMBLY
FIXTURE FRAME
4
5
1
2
4
5
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
SOCKET