Installation & Assembly

Parts & Hardware List:
Thank you for purchasing this quality product. Before beginning, please check the packing material
carefully for small parts which may have come loose inside the carton during shipping. Please do not
discard any packing material until all parts have been located. If any parts are missing, please contact
your dealer for prompt replacement.
ASSEMBLY INSTRUCTIONS:
SIDEBOARD
Assembly Procedures:
Step 1: Lay out all parts and hardware. Make sure the quantity of each is correct and the feet are free of stain,
staples, screws and nails.
Step 2: Place the metal frames (B) and metal stretchers (C) as shown.
Insert the metal frames (B) to the metal stretchers (C) and assemble with screws provided.
Step 3: Assemble the base panel (D) to the frame (B) as shown.
Step 4: Place the sideboard top (A) face down on a clean soft flat surface such as a blanket and ensure the
surface is clear of any objects that could scratch or damage the top.
Assemble the metal frame (B) with the base panel to the sideboard (A) as shown.
Use the adjustable leveler as necessary.
Caution: Over-tighting screws or bolts may result in damage. It is suggested that at least two people work
together for this assembly process to avoid injury. Following assembly, the furniture should be cleaned with
a quality, non-silicone furniture polish on a clean, soft cloth.
HARDWARE LIST
Q'TY
30 PCS1
2
SPRING WASHER
BOLT
1/4"*3/4"
Q'TY
1 PCA
2 PCS
METAL FRAME
SIDEBOARD
PARTS LIST
B
C
D
BASE PANEL
METAL STRETCHER
2 PCS
1 PC
1 PC
1 SET
ANTI-TIP KIT
HEX WRENCH
3
4
5
1/4"
1/4"*19*2mm
70*30*4mm
Adju stable
Leveler
Step 5
FLAT WASHER
Step 2
Step 3 Step 4
A
B
B
B
B
B
C
C
C
C
C
B
D
D
30 PCS
30 PCS