2 - People Recommended
Thank you for your purchase! We hope you enjoy this new addition to your home for many years to come. Our commitment to providing quality products does not simply end when you purchase our product. We fully stand behind our products from start to finish. We can help with assembly questions as well as, if necessary, replacing damaged or missing parts. To help expedite our service, please have these assembly instructions readily available, along with your order receipt.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
/ X8
END TABLE • Please keep instructions for future reference. • Check the quantity and irregularity of parts and hardware before you start . ..., ________ ....._ @) 1pc ___.
ASSEMBLY INSTRUCTIONS 1 Exploded View 2 Attach rods (#A,B,D) and dowels (#H) to top (#1) as shown in the diagram.
Align side panels (#2,3) to the top (#1), then place support tube (#6) with caps (#I) through the center rod of the top panel (#1). 1) Insert dowels (#H) to side panel (#2), then align center panel (#4) to the side panel rods. Secure by using hex nuts (#E) with washers (#F). 2) Attach rods (#D) to the center panel (#4), then insert support tube (#6) with caps (#I) to the rods.
Attach dowels (#H) to the side panel (#3). Align bottom (#5) to the unit, then secure by using hex nuts (#E) with washers (#F).