Thank you for your purchase! We hope you enjoy this new addition to your home for many years to come. Our commitment to providing quality products does not simply end when you purchase our product. We fully stand behind our products from start to finish. We can help with assembly questions as well as, if necessary, replacing damaged or missing parts. To help expedite our service, please have these assembly instructions readily available, along with your order receipt.
/7
Stand Bolt 5/16”x2” Spacer Lock Washer Threaded Stud Flat Washer 5/16" Allen Wrench
Turn right (clockwise) to tighten I. II. III. Align the base (#3) with the pre-drilled holes on the 4 stands (#2). Prepare 4 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt (#A) and then the flat washer (#C) onto the SAME bolt (#A), in that order. Insert the bolt assemblies through the base (#3) and secure those bolts using the Allen wrench (#D) to lock them with the stands (#2). Insert the 4 threaded studs (#F) into the top of the stands (#2).
I. II. Carefully place and center the glass top (#1) over the spacers (#E). Make sure the table is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.