Assembly Instructions (Coffee Table)

I.
Align the base (#3) with
the pre-drilled
holes on the 4
stands (#2).
II. Prepare 4 bolt assemblies
by inserting
FIRST
the lock washer (#B) onto
the bolt
(#A) and then the flat washer (#C) onto
the SAME
bolt (#A), in that order.
III. I
nsert the bolt assemblies through the
base (#3) and secure those bolts using
the
Allen wrench (#D) to
lock them with
the stands (#2).
Turn right
(clockwise) to tighten
Insert the 4
threaded studs (#F) into the
top of the stands (#2). Then insert the
4 spacers (#E) onto the 4 threaded
studs (#F).