Installation & Assembly

9
D
12 1/2”
318 mm
C
C
C
C
B
B
B
B
A
A
A
A
D
10
two people
are required
to assemble
this model
Slide the walls (17 1/2” - 444 mm) between the 2
legs to the stop bolts (BA-900).
Level the walls using the adjustable legs and a
level.
Slide the walls (12 1/2" - 318 mm).
* If you do not have a plexiglass , go to step 8.
Slide the plexiglass .
STEPS
1
2
3
4
5
6
7
8
9
10
11
A
D
B
A
B
C
D
A
A
12
tools suggested
#3
tools supplied
8
SU-895
B
A
4
6
1
D
A
17 1/2”
444mm
C
D
assemble this
model at its
final position.
ASSEMBLY INSTRUCTIONS FOR CONFIGURATIONS C-D
Place the guide below the legs completelyscrewed.
Slide the stop bolts into the grove tothe guide . Tight
the stop bolts .
Insert a rounded dowel on walls .
Insert a rectangular dowel on walls .
Install the supports on the legs with the guideand
srew both screws with the key .
Attach the surface to the supports withthe six
1” - 25 mm screws using the 3 pre-drilled holes
underneath the surface .
Install the braket with the four 5/8-16 mm screws
between the surface and one ofthe walls
Install the grommets and the caps.
If you want to add a pedestal 100620, a mobile
pedestal 100640, a hutch 100500, a transactional shelf
100770, a tackboard 100880 and / or a keyboard shelf
100830, you need to refer to the assembly instructions