Assembly Instructions ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Phillips Screwdriver Ce assembling a specific product (with 1 being (Not Included) easy and 5 being difficult). For some products, two persons are recommended.
EEE Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List #1x1pc Inner Cross Leg Outer Cross Leg Base #4 x1 pc Table Top Wood dowel joints are. meant 10 hold together the two sides of the structure by acting as a connector. By applying glue (#G) to the wood dowel it wilt make the joint stronger: 1.
pes #B8:x 4 pos “Faith it (leek) fo lighten Align the inner cross leg (#1) with the per-drilled holes on the outer cross leg Insert 4 screws (#A) through the per-drilled holes of the outer cross leg (#2) using fhe Phillips: screwdriver to lock {hem with the inner cross leg #1). Apply the 4 stickers (#B) to cover the blat holes.
#C x4 pos #0 x 2 pos #F x4 pos I. Insert two wood dowels (#D) into the per-drilled holes on the center of the assembled cross legs (#1 & #2). Il. Align the base (#3) with the two wood dowels (#D) and the prevailed holes on the assembled cross legs (#1 & #2). lll. Insert 4 flat washers (#C) onto 4 screws Then insert the screws (#F) through the per-drilled holes of the base (#3) Using the Phillips screwdriver ta lock them with the assembled cross legs (#1 Carefully turn the completed table upright.
