Assembly Instructions

VANITY LAMP
A B D
D
E
C
x2
F
F
A
B
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
Measure area and determine desired mounting height.
1.
Mounting plate [A] will attach to junction box.
3.
Detach mounting plate [A] from backplate [B] by removing
backplate nuts [C].
2.
4.
Remove socket ring [D] from socket [E].
5.
Slide glass shade(s) [F] onto socket(s) [E] and tighten
with socket ring(s) [D]. Install bulb(s) 100W max (not
included).
6.
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
E
C
C
Install light to wall. We recommend installationby a
qualified electrical professional. Backplate nuts [C] are
used to tighten light to wall.