Installation & Assembly

□ " F in icil(G )
ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A FLAT
SURFACE AND LINE THEM UP AS PER THE SKETCH.
2. SCREW TUBE (B), AND SOCKET SECTION (C) ONTO BASE (A) IN
TURN, AND PULL THE WIRE OUT FROM BOTTOM OF BASE (A).
3. INSERT BULB (D) INTO SOCKET.
4. INSERT HARP (E) INTO SADDLE OF SOCKET SECTION (C).
5. PUT SHADE (F) ONTO HARP (E), SECURE WITH FINIAL (G) AND
ADJUST SHADE (F).
6. INSERT THE POLARIZED PLUG INTO WALL OUTLET, TURN ON
THE SWITCH AND ENJOY YOUR NEW LAMP.
USE A 23W CFL TYPE BULB OR 100W (MAXIMUM)
INCANDESCENT A TYPE BULB.
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A
SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN
EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY INSERTED. DO NOT
ATTEMPT TO ALTER THE PLUG.
ATTENTION:
POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE PAS UTILISER CETTE FICHE POLARISÉE AVEC
UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI
LES LAMES PEUVENT ÊTRE INSÉRÉES A FOND SANS EN LAISSER AUCUNE PARTIE À
DÉCOUVERT.
& PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
& SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
S h a d e ( F )
H a rp (E )
-Bulb (D )