Caution : You must read this before you proceed Dining Chair Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat Panel 1
Label Picture Description QTY E Allen Key 1 F Bolt (M6*35MM) 5 G Bolt (M6*20MM) 3 H Flat Washer 8 Before Beginning Assembly: Overview Backrest(A) Right Armrest(C) Left Armrest(B) Seat Panel(D) FRONT FACING This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 B Open the carton and place all the parts onto a clean, non-marring surface, preferably a working top. Place Left Armrest(B) on the ground, as shown in picture above. Step 2 A B Attach and secure Backrest(A) to Left Armrest(B) using Bolts(G) and Washers(H) with Allen Key(E) Do not fully tighten the bolts. Step 3 A B D Attach the Seat Panel(D) to the assembled Backrest(A) and Left Armrest(B) using Bolts(F) and Washers(H) with Allen Key(E) Do not fully tighten the bolts. Step 4.
Step 4.2 c Turn the chair over, and assemble the Right Armrest(C) using Bolts(F) and Washers(H) with Allen Key(E) Do not fully tighten the bolts. Step 5 If wobble Test again 30CM~50CM Place the dining chair on a LEVEL SURFACE to check for wobbles. If it wobbles lift the dining chair to some 20cm to 30cm height from the ground. Keep your feet and toes well away from the drop zone. Drop the dining chair freely and vertically with the four legs, hitting the ground, all at the same time.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
