Caution : You must read this before you proceed CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Label Description QTY A Backrest Panel 1 B Seat Panel 1 C Right Leg Panel (with Leveler) 1 D Left Leg Panel (with Leveler) 1 E Leg Support Bar 1 Description QTY Label Picture Picture ① Short Bolt (M8x30mm) 3 ② Long Bolt (M8x50mm) 7 ③ ④ Screw (M6x50mm) Flat Washer (M8.
Before Beginning Assembly: Overview Backrest Panel (A) Right Leg Panel (C) Left Leg Panel(D) Seat Panel(B) Leg Support Bar(E) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Lay down Backrest Panel (A) then attach Seat Panel (B) to Backrest Panel (A) by using Bolt (①), Flat Washer (④) and secure by Allen Key (⑤) Do not fully tighten the Bolts.
Step 3 5 5 2 2 Step 3.1 A Step 3.2 D Pre-fixed Iron Dowel B Position housing of Left Leg Panel (D) into pre-fixed iron dowel on Seat Panel (B) as picture 3.1) Secure Left Leg Panel (D) to Seat Frame (B) by using Bolts(②) with Allen Key(⑤) 3.2) Secure Left Leg Panel (D) to Backrest Panel (A) by using Bolts(②) with Allen Key(⑤) Do not fully tighten the Bolts.
Step 4 5 Step 4.2 5 2 5 A 2 C 3 B E D Step 4.1 With assistance from your adult partners, turn pre-assemble part in step 3 to the other side Place Leg Support Bar (E) into housing of Left Leg Panel (D) Then, position housing of Right Leg Panel (C) into pre-fixed iron dowel on Seat Panel (B) and Leg Support Bar (E) as picture 4.1) Secure Right Leg Panel (C) to Leg Support Bar (E) by using Screw (③) with Allen Key(⑤) 4.2) Repeat same process in step 3.1 and 3.
Step 5 3 5 D E With assistance from your adult partners, turn the Chair back to normal flat ground Secure Left Leg Panel (D) to Leg Support Bar (E) by using Screw (③) with Allen Key(⑤) Do not fully tighten the Screw Step 6 If wobble Test again 30CM~50CM Place the Chair right side up on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Chair to some 30cm to 50cm height from the ground. Keep your feet and toes well away from the drop zone.
Step 7 Your Chair is ready for use. Please use adjustable foot for uneven floors. This Chair can only be used on a flat, level surface.
Page 9 of 9