Assembly Instructions

Step 7:
Your Chair is ready for use
Please use adjustable foot for uneven floors
This Chair can be used on a flat, level surface
With assistance from your adult partners, turn the Chair back to normal flat
ground.
Place the Chair on a LEVEL surface.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit onto the Chair.
This pressure will help to align all the parts at all joint areas.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts and Screws in a sequential
manner, until evenly secured.
When tightening the Bolts and Screws tighten sequentially.
Adjust the Levellers until the Chair is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold
the Chair while you are working.
Step 6:
Adjust Pre-installed Levellers height for balance
8