END TABLE ASSEMBLY INSTRUCTION Page 1 of 4
ASSEMBLY INSTRUCTION Assembly Instruction ASSEMBLY TIPS: 1.Remove hardware from box and sort by size. 2.Please check to see that all hardware and parts are present prior to start of assembly. 3.please follow attached instructions in the same sequence as numbered to assurefast & easy assembly. Warning! 1.Don't attempt to repair or modify parts that are broken or defective.Please contsct the store immediately. 2.This product is for home use only and not intended for commercial estabalishment.
ASSEMBLY INSTRUCTION Z HARDWARE PACKAGE: NO DESCRIPTION FIGURE QTY 1 2 3 4 5 6 STUD BOLT Φ 5/16*(10+65)mm 4pcs CHROMED WASHERΦ5/16*55mm BIG WASHER Φ5/16* 50mm 8pcs SCREW Φ5/16*35mm 5/16*35mm 4pcs 4pcs FLAT WASHER Φ5/16*20mm 4pcs ALLEN BOLT Φ5/16*35mm 4pcs 7 SMALL WASHER Φ5/16*25mm 4pcs 8 ALLEN WRENCH Φ5/16*66mm 1pc STEP 1:Place top upside down on a soft and scratch resistant surface, then spin screws(part "1") into four holes on the top.
ASSEMBLY INSTRUCTION STEP 2:Put chromed washers on pillars(part"B")with grooved side down, and then align the holes of shelf (part"D") to that of chromed washers(part"3").Then put small washers (part"7")first, flat washer(part"5"),and screw Allen bolts (part"6")into the holes tightly with Allen wrench. 7 Page 4 of 4 4PCS 5 4PCS 6 4PCS 7 4PCS 8 8 STEP 3: Complete.
