Installation & Assembly

Sink to Countertop Installation Guide

Required For Installation

Sink basin

Countertop

Backsplash

Permanent marker

Caulking gun

Silicone sealant

Wing bolts

Undermount clips

01. Place & Trace

MARKER

Place the sink basin on the bottomside of the countertop and

create mark guides onto the countertop and sink basin.

02. Prepare Sink Basin

SILICONE SEALANT

Apply a heavy amount of silicone sealant around the topside of

the sink basin’s edge using a caulking gun.

03. Flip Over & Place

Flip the sink basin over and carefully place it within the

guidemarks on the bottomside of the countertop.

04. Dry in Place

Once the sink basin is placed in the desired position, press down and

smooth out any excessive caulk with your ﬁnger.

05. Preparing Stud Bolts

Fill small divots in countertop with epoxy.

Insert stud bolt with male end facing upwards.

Allow 12 - 24 hours to dry along with the sink basin.

EPOXY

1 2

PAGE 1
Sink to Countertop Installation Guide Required For Installation Sink basin Caulking gun Countertop Silicone sealant Backsplash Wing bolts Permanent marker Undermount clips 01. Place & Trace 02. Prepare Sink Basin Place the sink basin on the bottomside of the countertop and create mark guides onto the countertop and sink basin. Apply a heavy amount of silicone sealant around the topside of the sink basin’s edge using a caulking gun. ER MARK SILIC ONE SEAL ANT 03. Flip Over & Place 04.
PAGE 2
Sink to Countertop Installation Guide 05. Attach Undermount Clip 06. Prepare Cabinet Attach the undermount clips using the provided wing bolts to hold the sink basin in place. Apply sealant to the bolt for added stability. Apply silicone sealant around the topside of the cabinet’s edge using a caulking gun. SILICON E SEALA NT 08. Backsplash Installation Carefully place the countertop and sink onto the cabinet and press down firmly. Make sure to clean away any excessive sealant.