ASSEMBLY INSTRUCTIONS Glass L-Shape Desk 30min 51"x20"x29" 1/5
ASSEMBLY INSTRUCTIONS Glass L-Shape Desk PARTS LIST Part # Part Name Dimension (1) Metal Side Frame / 4 (2) Back Metal Support Frame / 2 (3) Metal Cross Bar / 4 (4) Sector Metal Frame / 1 (5) Glass Sector Top Panel (20"x20"x0.19") 1 (6) Glass Top Panel (29.2"x20"x0.19") 2 3 3 1 4 3 6 1 3 5 2 1 6 1 HARDWARE LIST 8x A Foot Mat 8x B Short Bolt 0.23"x0.78" 4x C Bolt 0.23"x1.5" 4x D Long Bolt 0.23"x2.3" 2/5 13x E Plastic Suction Cap 1x F Allen Key 0.15"x0.98"x2.
ASSEMBLY INSTRUCTIONS Glass L-Shape Desk 1. Allow ample room for assembly and in close proximity to where product will be planced. 2. Assemble the product on surfaces that do not cause scratches to the exterior gloss and finish. 3. Please check all of the parts and quantities are included before assembly.Contact customer service for missing parts. 4. Identify all of the parts, hard ware and quantities required for each step. 5.
ASSEMBLY INSTRUCTIONS Glass L-Shape Desk Assemble Foot Mat(A) to Metal Side Frame(1). 1 A A Assemble Back Metal Suppor Frame (2) & Metal Cross Bar (3) & Sector Metal Frame (4) to b y using Short Bolt (B) & Bolt (C) & Long Bolt (D) as shown. Don’t fully tighten the Bolt(C) at this time.
ASSEMBLY INSTRUCTIONS Glass L-Shape Desk Assemble Back Metal Suppor Frame (2) & Metal Cross Bar (3) & Sector Metal Frame (4) to b y using Short Bolt (B) & Bolt (C) & Long Bolt (D) as shown. D D 3 B B 3 C Don’t fully tighten the Bolt(C) at this time. 2 1 B B 1 Insert Plastic Suction Cap (E) to the Metal Frame,then attach Glass Top (6) & Glass Sector Top panel (5) to its positon as shown. E Make sure the edge of the Glass Top to be aligned with metal frame, then fully tighten all the Bolt (C).
