Assembly Instructions

Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully sit onto the Chair.
This will help to align all parts at all joints.Then get off the Chair, and in a sequential manner,
proceed to tighten all Bolts. When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute this same process.
Note: This step is done best with the assistance of a second adult.
Put Seat Cushion(E) and Back Cushion(F) on the Chair.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Step 4
Step 5
Back Cushion(F)
Seat Cushion(E)
Page 4 OF 5