Assembly

6 |
English
Note! Installation by a certified electrician is recommended.
• Find your main fuse or breaker box in your home.
• Turn off and/or unscrew all fuses.
• Turn off all circuit breaker switches that control
power to the room in which you are working.
• Turn any wall switches off. If any pull chains or
switches are on the fixture, turn off.
Note! Do not damage any wire insulation during
installation. Ensure no rough or sharp edges are in
contact with any wires.
Mounting Instructions:
1. Confirm power is off.
2. Remove the screws(3) from lamp body(C)
and take the mounting bracket(B) down from
lamp body(C).
3. Thread screws(1) into the mounting
bracket(B).
4. Attach the mounting bracket(B) to an
electrical box(A) with screws(1).
Make the wire connections:
1. Confirm power is off.
2. Connect the electrical box black wire to the black fixture wire with connector (2).
3. Connect the electrical box white wire to the white fixture wire with connector (2).
4. Connect the green/yellow grounding wire to the copper fixture wire with connector (2).
Attach the lamp:
1. Attach the lamp body(C) to the mounting bracket(B) with the screws(3).