Owner Manual

Stand the Table up, with assistance from your partner.
EXERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles on a level surface.
If no wobbles are found, in a sequential manner, gradually tighten all Bolts
until evenly secured.
When tightening the Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one.
This could cause the frame to warp.
If there are still wobbles, loosen the Bolts and excute the same process.
If the Table is not Stable it could lead to damage to the product.
Your Dining Table is ready for use.
This Dining Table can only be used on a flat, level surface.
Page 6 OF 7