Caution : You must read this before you proceed Coffee Table Label Picture Description QTY A Top Panel 1 B Front & Back Panel 2 C Side Panel 2 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*40mm) 13 ② Washer 13 ③ Allen Key 13 Before Beginning Assembly: Page 2 OF 5
Overview Top Panel(A) Front & Back Panel(B) Side Panel(C) This Coffee Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of Coffee Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
Step 2 A Put the Top Panel(A) with its face down onto a soft and clean surface, turn the body base upside down and place it onto the Top Panel(A). Attach the Top Panel(A) with Washer(② )Bolt(①) by using the the Allen Key( ③ ) to make a whole body. Do not fully tighten the bolts. Step 3 Your table is ready for use. This Table can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Loveseat Label Picture Description QTY D Loveseat - Backrest 1 E Right Armrest 1 F Left Armrest 1 G Seat 1 Page 1 OF 6
H1 Back Cushion 2 H2 Seat Cushion 2 Description QTY ① Bolt (M6*40mm) 14 ② Washer 14 ③ Allen Key 1 Label Picture Before Beginning Assembly: Page 2 OF 6
Overview Back Cushion(H1 ) Loveseat - Backrest(D) Right Armrest(E) Seat Cushion(H2) Left Armrest(F) Seat(G) This Loveseat has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
Step 2 G Place the Seat (G) between the Right Armrest(E) and Backrest(D). Attach the Seat(G) to the Right Armrest(E) with hardware as picture 3 and 4 shows. Attach Seat(G) to the Backrest(D) with hardware as picture 5 shows. Use an Allen Key(③) to partially tighten these. Do not Fully Tighten at this stage. Step 3 F 7 8 9 Place the Left Armrest (F ) against the Backrest(D) and the Seat(G). Make the metal rod on Backrest(D) insert into the MOUNTING POSITIONs of Left Armrest( F ) as picture 6 shows.
Step 4 Adjust the Leveler to ensure good stability. Step 5 H1 H2 Put the Seat Cushion(H2) & Back Cushion(H1 ) on the Loveseat. Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Chair Label Picture Description QTY I Chair - Backrest 1 E Right Armrest 1 F Left Armrest 1 L Seat 1 M1 Back Cushion 1 Page 1 OF 6
M2 Label Seat Cushion Picture 1 QTY ① Bolt M6*40mm 13 ② Washer 13 ③ Allen Key 1 Before Beginning Assembly: Page 2 OF 6
Overview Back Cushion(M 1) Chair - Backrest( I ) Right Armrest(E ) Seat Cushion(M 2) Left Armrest(F) Seat( L ) This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly.
Step 2 L 3 4 Place the Seat (L) between the Right Armrest(E) and Backrest(I). Attach the Seat(L) to the Right Armrest(E) with hardware as picture 3 and 4 shows. Use an Allen Key(③) to partially tighten these. Do not fully tighten the bolts. Step 3 F 6 7 8 Place the Left Armrest (F ) against the Backrest(I) and Seat(L). Make the metal rod on the Backrest(I) insert into the MOUNTING POSITIONs of the Left Armrest(F ) as picture 5 shows.
Step 4 Tighten all bolts completely. adjust the Leveler to ensure good stability. Step 5 M1 M2 Put the Seat Cushion(M1) & Back Cushion(M2) on the Chair It is ready for use. This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
