Installation & Assembly

I. Carefully place the top frame (#1) onto a protected surface.
II. Align the top of the legs (#2) to the pre-drilled holes located
on the bottom of the top frame (#1).
III. Prepare 16 bolts assemblies by inserting a flat washer (#B) onto the
bolts (#A). Insert into holes and secure using the Allen wrench (#D).
Insert the threaded end of the
handle (#6) into the pre-drilled
hole located on the top of the
spark guard (#5). Onto the
other end, insert a flat washer
(#B) and then a hex nut (#C).
Turn right to tighten.
ASSEMBLY IS COMPLETED