Installation & Assembly

Step 2
Step 3
Place the Table Top(A) facedown onto a clean, non-marring
surface.A helper should help hold B.
3.1) With the help of another adult，attach the Table Legs(C)
to the Table Base(B) using Bolts(⑤), Spring
Washers(②),Washers(③),the Angle iron(⑥)and the Allen
Key(④).
Tighten all Bolts at all joints in a sequential manner.
Find A flat case to hold A, then pull the lift panel open.
Attach Table Legs(C) to Table Top(A) using Bolts(①), Spring
Washers(②), Washers(③) and the Allen Key(④).
Do not fully tighten the Bolts at this time.
Page 4 OF 6