Outdoor Wicker Corner Chair
PART LIST A C B Arm Panel 1 PC Back Panel 1 PC Cover of Back Cushion * 1 PC Core of Back Cushion 1 PC Cover of Seat Cushion * 1 PC Seat Panel 1 PC H G F E D Core of Seat Cushion 1 PC I Cover of Side Cushion * 1 PC Core of Side Cushion 1 PC *Please note cushion covers will ship separately.
Step 1. Lay back panel (part B) down on a soft flat surface, such as carpet, as shown below. Attach arm panel (part A) to back panel (part B) using bolts(part #1),washers (part #3) nuts(part #2),wrench(part #5) and allen key (part #6). NOTE:Please do not fully tighten bolts until unit is fully assembled. #6 #1 #3 #3 #2 #5 A #1 #2 #3 #5 #6 B x3 x3 x6 x1 x1 Step 2.
Step 3.Insert core of seat cushion ( part E ) into cover of seat cushion ( part D). Insert core of back cushion (part G) into cover of back cushion (part F). lnsert core of side cushion (part I) into cover of side cushion (part H). E D G F I H Step 4.Carefully turn the assembled chair upright and add cushions as shown below.
Step 6.Use plastic clips (part #4) to secure additional units together as shown.
