Owner Manual

Assembly Instruction
Step 1:
Connect the leg (D) and base (C)
with the bolts (F), tighten the bolts
with Wrench (G).
Press the Casters (E) into the holes
at the end of each Leg (D).
Tips:
Don’t make the caster go vertical
to the hole, it will be easy for
installation if make it
has a little angle.
And then insert the Gas Lift (B)
into the center hole of the Base.
Step 2:
(C)
(D)
(13)×2
1
2
4
(B)
(E)