Owner Manual

8
IMPORTANT
Fan installation must be completed, including the
installation of the fan blades, before testing of the
controls.
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.
2. Check the operation of the fan by sliding the bar of
the control through the four positions marked 1 - 4
(“0” position is OFF) (Figure 15).
3. All fans are shipped from the factory with the
reversing switch positioned to circulate air
downward. If airflow is desired in opposite
direction, turn your fan OFF and wait for the blades
to stop turning, then slide the reversing switch to
the opposite position, and turn fan on again
(Figure 16).
4
0
3
2
1
Figure 15
4. The fan blades will turn in the opposite direction
and reverse the airflow.
REVERSIBLE
SWITCH
Figure 16
Reverse Switch Information
Season Rotation Direction Switch Position
Summer Counter-Clockwise Down
Winter Clockwise Up
Maintenance
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.
WARNING
!
Accessories
1. Ceiling Fan Controls (see store or catalog).
2. Downrod Extension Kits (see store or catalog).
The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.
WARNING
!
WARNING
!
Using Your Ceiling Fan
This product is designed to use only those parts
. Substitution of parts
or accessories not designated for use with this
product could result in personal injury or
supplied with this product and/or any accessories
designated specifically for use with this product