Assembly Instructions

5 of 9
Step 3
Position Corner Sofa right side up.
Cover the bottom of the Chair Seat(A) with the non-woven fabric.
Smooth down the Magic Tape on all four sides of the Seat by hand.
Install the Legs(D) into the bottom of the Chair Seat(A) by placing a
Washer Ring(①) onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at
each Corner of the Bottom of the Chair Seat(A).
Tighten by turning the Legs clockwise.
Note: The use of Washer Ring(①) are OPTIONAL and are especially
useful to help alleviate slight wobbles.
Some Legs may need more than one Gasket whilst some Legs may not
need any.
Position Sofa right side up and test for stability on a Level Surface.
Add or remove Washer Ring(①) where needed to achieve stability.
Step 4
Long Backrest(B)
Short
Backrest(B1)
Chair Seat(A)