Installation & Assembly

C. Side Rails
B. 'H' Leg Frame
Place the Barstool Seat (A) onto a soft surface to avoid any scratches or
damages to the product.
REMOVE the Seat Base Cover from the underside of the Seat (A), take out
the Side Rails (C) and hardware.
Step 2
Insert the Side Rail (C) into the oval housing of 'H' leg frame (B) as shown
above.
Then, use the hardware of Part B to attach the Side Rails (C) to the other 'H'
Leg frame (B).
WARNING !! DO NOT OVER TIGHTEN. OVER TIGHTENING COULD LEAD
TO DAMAGE OF THE PRODUCT. TIGHTEN ONLY UNTIL SECURE.
Step 1
A. Seat
Place the Seat (A) onto a soft and clean surface to avoid any scratches or
damages to the product.
Attach the assembled unit from Step 2 to the Chair Seat (A).
Use the hardware of Part A to connect these.
WARNING!! DO NOT OVER TIGHTEN. OVER TIGHTENING COULD LEAD
TO DAMAGE OF THE PRODUCT. TIGHTEN ONLY UNTIL SECURE
Step 3
Page 4 OF 6