AR RAN 1 TY W 5-Pieces Conversation Set 1YEAR
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. Safety For domestic use only. Don't tighten all the bolts before the product is fully assembled. It would be useful to ask someone to help you assemble the product. Periodic structural checks of this product should be undertaken, do not use if you have any doubts about its Do not stand on the seat. Do not sit on the armrest. Do not let children play with this product. Maximum load per seat: 250 lbs.
Tips for Cushions In order to compress the package, we put the cushions in the gap of some parts. So there may be crinkle on the fabric. Don’t worry. Just flap every corner of the cushion evenly and it will get back into its original shape soon.
COMPONENT LIST - ARMCHAIR Item no. Reference Image Description Qty.
NOTE: When tightening the screws, tighten sequentially. DO NOT tighten any screws fully and then move on to the next one. This may cause the frame to warp. If there is still wobbles or screw holes cannot be aligned,loosen the screws and execute this same process. If the Chair is not stable it could lead to damage to the product. 1 Attach the Seat Base (A) to the Right Armrest (B) by securing with Head Cap Screws (F) and Washers (E). Do this in 2 places. x2 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
2 Attach the Seat Back (D) to the Right Armrest (B) and Seat Base (A) by securing with Head Cap Screws (F) and Washers (E). Do this in 3 places. x3 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
3 Attach the Left Armrest (C) to the Seat Back (D) and Seat Base (A) by securing with Head Cap Screws (F) and Washers (E). Do this in 4 places. x4 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
4 Tighten all 9 Screws into place with Allen Key (G). G x9 5 NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED, LOOSEN ALL THE SCREWS AND GO BACK STEP 1 AND RESTART ASSEMBLY. Place the chair on a level surface, then place Seat Cushion (H) on the chair. Your chair is ready for use.
COMPONENT LIST - TABLE Item no. Reference Image Description Qty.
NOTE: When tightening the screws, tighten sequentially. DO NOT tighten any screws fully and then move on to the next one. This may cause the frame to warp. If there is still wobbles or screw holes cannot be aligned,loosen the screws and execute this same process. If the Table is not stable it could lead to damage to the product. 1 Attach the Table Leg (K) to the Table Top (J) by securing with Head Cap Screws (F) and Washers (E). Do this in 1 place.
2 Attach the Back Panel (M) to the Table Leg (K) and Table Top (J) by securing with Head Cap Screws (F) and Washers (E). Do this in 2 places. M K x2 F E J x2 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
3 Attach the Table Leg (L) to the Table Top (J) and Back Panel (M) by securing with Head Cap Screws (F) and Washers (E). Do this in 2 places. M L F x2 E J x2 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
4 Attach the Table Bottom (N) to the Table Legs (L) &(K) and Back Panel (M) by securing with Head Cap Screws (F) and Washers (E). Do this in 3 places. F E x3 N K M L x3 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
5 Tighten all 8 Screws into place with Allen Key (G). G x8 NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED, LOOSEN ALL THE SCREWS AND GO BACK STEP 1 AND RESTART ASSEMBLY. 6 - 13 - Place the table on a level surface. Your table is ready for use.
COMPONENT LIST - OTTOMAN Item no. Reference Image Description Ottoman S Top Qty.
NOTE: When tightening the screws, tighten sequentially. DO NOT tighten any screws fully and then move on to the next one. This may cause the frame to warp. If there is still wobbles or screw holes cannot be aligned,loosen the screws and execute this same process. If the Ottoman is not stable it could lead to damage to the product. 1 Attach the Side Panels (T) to the Ottoman Top (S) by securing with M6*40 Head Cap Screws (F) and washers (E).
2 Attach the Connecting Rod (U) to the Side Panels (T) by securing with M6*15 short Head Cap Screws (V) and Washers (E). Do this in 2 places. V T U T 2 S x4 NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
3 Tighten all 8 Screws into place with Allen Key (G). G x8 NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED, LOOSEN ALL THE SCREWS AND GO BACK STEP 1 AND RESTART ASSEMBLY. W 4 - 17 - Place the Ottoman on a level surface, then place Seat Cushion (W) on the ottoman. Your ottoman is ready for use.
