Instruction Manual

Fig. 1
3. REMOVING THE DECORATIVE
BOTTOM COVER & BOTTOM COVER
CAUTION: Before starting installation,
disconnect the power by turning off the circuit
breaker or removing the fuse at the fuse box.
Turning power off using the fan switch is not
sufficient to prevent electric shock.
Step 1. Remove the Decorative bottom cover
from the ceiling fan by turning bottom cover
counterclockwise. (see figure 1)
Step 2. Remove the bottom cover by loosening
two of the mounting screws and removing the
third, all located on the mounting plate.
Rotate the bottom cover counterclockwise so
the mounting screw heads are at the "large"
end of the keyhole slots and remove the
housing. (see figure 2)
Bottom cover
mounting plate
Decorative
bottom cover
Fig. 2
Bottom cover
Screws
Mounting plate
LED Light Fixture
2