Instruction Manual

4. INSTALLING THE LIGHT FIXTURE
1. Raise and hold the light plate close to the
mounting plate of the ceiling fan. Attach the
fixture wires to the fan by pushing the wire
connectors together. White from the fixture to
the White wire from the fan. Blue wire from the
fixture to the Black wire from the fan. (Fig 3)
2. Carefully push all wires back into the
mounting plate, then install the light plate onto
the mounting plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 3)
3. While holding the LED light kit under the fan
motor assembly, make the 2-pin wire
connections:
- Red to white
- Black to black
4. Carefully push all wires back into the light
plate, then install the LED light kit onto the
light plate with 3 screws provided. Be sure to
tighten all screws. (Fig. 4)
5. Attach the glass shade to the light plate by
turning the glass shade clockwise. DO NOT
OVER TIGHTEN. (Fig. 4)
3
Fig. 3
Fig. 4
Screws
Light plate
Mounting plate
Wire connectors
LED light kit
Glass
shade
Light plate
Screws