User's Manual

current
time
[S/S]
[S/S]
[S/S][S/S]
[S/S]
48 hour Altitude
Log /Recall
Absolute
Altitude
Altitude
Alarm
Ascending/
Descending
Altitude
Function Overview
Altitude Graph
Altitude
Difference
Temperature
[L/R]
hold [L/R]*1
Altitude
Lock
absolute
altitude
Altimeter Mode
13.0 Altimeter Mode - Function Overview
13.1 Altimeter Mode - Function Display
13.2 Altimeter Mode - Setting the Units and Altitude Lock
+
Absolute Altitude: The altitude difference between the current
altitude and Sea Level (0 m).
+
Altitude Difference: The altitude difference between the current
altitude and the altitude where the altitude difference is set to zero.
+
48 Hour Altitude Log and readings Recall: The Watch logs the
altitude every hour at the hour automatically (i.e 1:00, 2:00, etc.)
for 48 hours, and these logged altitude readings can be recalled by
user.
+
Altitude Graph: This altitude graph is plotted from the 48 Hour
Altitude Log, the x-axis is the time variable (1 hour) while the y-
axis is altitude variable.
+
Altitude Alarm: An alert will prompt passes through
the defined altitude (from below or above the altitude).
when the user
There are
two altitude alarms - Altiutude Alarm 1 and 2.
+
Ascending/Descending Altitude: The Watch will count the
ascending or descending altitude automatically when this function
is activated.
+
Altitude Adjustment: A function to calibrate the Watch to achieve
a more accurate altitude reading.
+
A function to lock the altitude. The altitude will not
be changed when Altitude Lock is activated
Altitude Lock:
Altitude Graph *4
Temperature *1
Altitude Difference*2Descending Altitude*3
Ascending Altitude*3
IMPORTANT:
*1. In order to get an accurate air temperature, remove the Watch from the wrist for a while (to
eliminate body heat effect) before the measurement.
NOTE:
*2. To get the Altitude Difference of two points, reset the Altitude Difference (Default:100 m) to 0
at the 1st. point.
*3. To get Ascending and Descending altitude, start the AS/DS counter prior to the ascent or
descent.
*4. To read the Altitude Graph on a daily or continual basis, choose 'Daily' or 'History' Chart
option at 14.3.6.
NOTE:
*1 The altitude will NOT be changed when Altitude Lock is activated. Fo r exa m p l e , ac t i v a t e
Altitude Lock when staying in a campsite, it keeps the Watch's altitude unchange even a
changing of weather overnight.
hold [S/S]
Frehenheit
Celsius
locked
Altitude Lock
Temperature unit
Altitude unit
meter
feet
unlock
Level 2
Level 3
Level 4
+
YES*1
+
NO
+
YES*1
+
NO
+
Setting
+
Cur. Alt (Set
the Alarm for
Current
Altitude
+
Alt. Dif (Set
the Alarm for
Altitude
Difference)
+
YES*1
+
NO
+
YES*1
+
NO
+
Setting
+
Alarm 1/2*2
+
ON/OFF*3
+
Start
+
Clear
+
Mx. Alt
(Maximum
altitude)*4
+
Mn.Alt
(Minimum
altitude)
+
Daily
+
History
hold
[M]
Level 1
1. Alt. Dif (Reset
a l t i t u d e
Difference to 0).
2. R e f . A l t . ( S e t
r e f e r e n c e
A l t i t u d e -
)
3. A l t . A l m . ( S e t
Altitude Alarm)
4. A S / D S
( S t a r t / C l e a r
Ace n ding / Desc
ending log)
5. V w.Log (Vi e w
Max., Min, and
t h e 4 8 h o u r
altitude)
6. Chart (Daily or
Histo ry( con tin u
a l ) a l t i t u d e
chart)
Calibration
13.3 Altimeter Mode: Altimeter Function Menu
NOTE:
*1.Press [S/S] to process the selection (Yes) or press [ESC] to escape out of
the selection (NO).
*2.Press [S/S] to select between Alarm 1 and Alarm 2.
*3 Press [L/R] to select between 'ON' and 'OFF' the alarm. Hold down (M) to
select setting display.
*4 Press [M] to review the logged altitude.
Altimeter Mode
Altitude
Adjustment
[L/R]
+
Scroll the menu
+
Change the setting
[S/S]
+
Scroll the menu
+
Change the setting
[M]
+
Confirm the
selection/setting
+
Go to next setting
level
[ESC]
+
Exit the current
display
+
Go to last setting
level
+
-1 hour log
( a t t h e
p r e c e d i n g
hour)
+
- 2 ~ - 47
hour logs
+
- 4 8 h o u r
log
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
NOTE: See 13.3.1 - 13.3.6 for more detail of this function menu.