User's Manual

Target Time
Counting*1
'Zero'
Stop Counting
2' 59''
5 min
45 min
10 min
15 min
Target Time Setting Sequence
User Preset
Value *3
Quick-Set-Value*2
[L/R] [L/R] [L/R]
[L/R]
[L/R] [L/R]
7.0 Timer Mode - Target Time Setting the
7.1 Timer Mode - Setting the User Preset Value
7.2 Timer Mode - Using the Countdown Timer
3 min
Timer Mode
Timer Mode
target
time *1
current
time
Beep
[S/S]
[S/S]
[L/R]
NOTE:
(*1) The Timer starts counting from the Target Time to zero.
(*2) The Watch includes 5 Quick-Set-Values : 3, 5, 10, 15 and 45 minutes for setting the Target
Time faster, and these values CANNOT be set by user.
(*3) The User Preset Value (for setting the Target Time) CAN be set by user, see 7.1 for the
details of the setting.
NOTE:
The setting range is up to 99 hours 59 minutes 99 seconds.
+
NOTE:
(*1) The Watch will prompt (during the counting) as follows:
a) Beep once every minute for the last 10 minutes, i.e
10'00", 9'00" and etc.
b) Beep once every 10 seconds for the last minute, i.e
0'50", 0'40" and etc.
c) Beep once every seconds for the last 5 seconds.
d) Beep for 30 seconds when timer reaches zero (Press
any button CAN stop the beep instantly).
(*2) The Target Time will be reloaded automatically.
change setting
value
change the setting
value faster
[S/S] / [L/R] hold [S/S] / [L/R]
User Preset Value Setting Sequence
hold
[M]
minute
second
hour
[ESC]
[M]
[M]
[M]
time
(minute)
[S/S]
[S/S] [S/S] [S/S] [S/S]
03
1
23 2
2. Multiple Countdown
1. Single Countdown
3 2 1 0
Single and Multiple Countdown
[L/R] [L/R]
*2
3
3
dual
time
current
time
NOTE:
The 'second' digits of Dual Time and the 'second' digits of Current Time are the same .
+
Dual Time Mode
change setting
value
change the setting
value faster
[S/S] / [L/R] hold [S/S] / [L/R]
Dual Time Setting Sequence
8.0 Dual Time Mode - Setting Dual Time
minutehour
[M]
hold
[M]
[ESC]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]