Instruction Manual

Revision 1.1
July 10, 2013
2
To activate a heart rate chest strap, either wear it on or short the contact. Upon detection on the contact
points, the heart rate sensor should start advertising. If the watch scans it, it will establish a connection
with it. After a connection is made, the watch will start retrieving heart rate data every second. It is
recommended to go to heart rate view to have heart rate value display on screen.
As shown in figure 3, if one wants to wear it, it is better be moisturized so as to enhance detection. Then
plug the heart rate sensor to the belt. Wear it on to the body and center the sensor to the central of one’s
chest.
Figure 3