User's Manual

AFTER SALES SUPPORT
[e-mail]
GB
IRE
00800/52323000
Operation
GBIRE
33
Setting the time (SECOND)
If you have deactivated the “GPS Sync” function,
manually set the time by following the steps below
:
The time will appear on the display
panel and the word “SECOND” will appear
on the top row
15
. The seconds indicator
will flash.
1. To reset the seconds to zero,
tap the ST./STP key
9
.
Then wait e.g. for the time signal
from a radio station.
2. Tap the VIEW key
10
.
The word “MINUTE” will appear on the top row
and the minute indicator will flash.
3. Use the ST./STP
9
and
LAP/RESET
11
keys to set the minutes.
4. Repeat steps 2 and 3 to set the hours,
year, month and day.
Time format (FORMAT)
You can switch the time displayed
between 12 hours (“AM/PM”) or 24 hours.
− Tap the ST./STP key
9
to switch the
time format.
Korrektur
Korrektur
Korrektur
The word “MINUTE” will appear on the top row
The word “MINUTE” will appear on the top row
and the minute indicator will flash.and the minute indicator will flash.
Korrektur
and and
and
keys to set the minutes. keys to set the minutes.
Repeat steps 2 and 3 tRepeat steps 2 and 3 t
year, month and day.year, month and day.
Time format (FORMAT)
Time format (FORMAT)
You can switch the time displayed You can switch the time displayed
V1
Then wait e.g. for the time signal Then wait e.g. for the time signal