Ana-Digit Smart Watch Instruction Manual
FCC Statement FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1.0 Introduction Thank you for your purchase of the Ana-Digit Smart Watch. With this watch, you can monitor your daily activities, incoming / missed call, email and message ! Simply put the watch on your wrist and this watch will record the number of steps taken, the distance travelled and the calorie burnt in your daily activity for your review. This product has to be used in line with an iOS devices that support Bluetooth 4.0 technology to review your daily activities.
2.
3.0 Device pairing The following procedures guide you through the device pairing process: 1. Download the app ( Name: BLE Analog) from the App store in your deivce before use. After installing the APP, go to Setting in your iOS device and activate Bluetooth.
3.0 Device pairing and unpair Menu Setting Pair 2. Go to the device pairing screen in the APP : Menu Settings Device Pairing. Click the PAIR button. The APP starts scanning for matching an available device. To unpair the Ana-Digit smart watch, press the forget button in the App.
3.0 Device pairing BEEP BEEP BEEP [G]: GOAL Press and hold [G] button for 2 seconds. Pairing success 3. Press and hold [G] button for 2 seconds to start pairing, beep beep sound will be generated. When pairing are successful, beep beep beep sound will be generated.
4.0 Time setting Analog movement Time setting can be done manually with crown or via smartphones. Note: Time setting is necessary whenever battery is changed. 4.1 Time setting with crown — — — Pull the crown out to adjust the hour and minute hands. Recommend to pull the crown when the Second hand comes to 12:00 position. Adjust the hands to a few seconds ahead of the real time Push the crown back to its normal position at the moment when the hands sync with the real time.
4.2 Time setting through Apps Menu Update Smart Watch Time Go to smart watch time setting screen in the APP: — — — — — Menu Update Clock The analog time is frozen by the APP. Input the current TIME (HH:MM:SS) in the APP Press “Sync Now” button and Beep-Beep is generated. The watch hands will be advanced in fast pace to the current time automatically. Beep-Beep-Beep is generated at the end of adjustment.
5.0 Notification mode Simply press the equivalent button to switch to the desired mode. [P]: PAGING Press to find the smartphone [S]: SHUTTER Press to take snapshots [ST]: STATUS Press once to show all kinds of notification alerts if available Press and hold 2 seconds to clear all notification status [G]: GOAL Press to light up the goal progress bar for 3 seconds Press and hold 2 seconds to start pairing Note: Alert mode. Shows all kinds of notification alerts when available.
5.0 Notification mode When new notification comes, smartwatch responds with 3 types of alerts: — LED ( Slow - Fast ) — Buzzer Sound ( Single beep - Multiple beep ) — Vibration ( Weak - Strong ) Different notification can be customized by one of it or all three types of alerts. In-coming call and missed call alerts Link lost alert If the Bluetooth link is broken, most likely the phone and watch are too far apart.
5.1 Notification mode - Smartphone Notification Alerts Starting from iOS 7.0 all notifications conceived by iPhones can be directed to Bluetooth 4.0 (or BLE) devices e.g. smartwatches, wristbands. To do that users have to enable the PopUp alerts for dedicated APP: Settings Notification Center Specify apps (e.g. Phone, Email, Message, WhatsApp etc) Select “Alert” option.
6.0 Activity Goal Mode 80~99% of target goal completed 60~79% of target goal completed 40~59% of target goal completed 20~39% of target goal completed [G]: GOAL 0~19% of target goal completed Watch has built-in 3-axis accelerometer sensor which monitors and records your physical activity 24/7. One of the 4 types (Steps, Distance, Calorie and Active time) daily goal can be selected and display on the watch. Target setting for each goal is also customizable.
7.0 Find Phone / Watch [P]: Paging The LED ( ) flashes in this mode. Find Phone: Press [P] pages the smartphones iOS device will be alerted page watch Find Watch: Go to the page watch menu in the App, click the page button Smart watch will be alerted.
8.0 Remote Shutter [S]: Shutter Remote Shutter: Work as remote shutter control button. Bring the APP to foreground press [S] button in watch to activate the photo taken screen. Press [S] button take a snapshot and It will be saved into the smartphone’s album.
9.0 Battery charging The Ana-digit Smartwatch is supplied with an external “Charger” device, which allows you to charge your watch anytime and everywhere by simply connecting the Charger to a USB port or an external 5V Power pack. The SmartWatch has an integrated low-battery indication. If the watch is in low-battery condition, the LED icons and will flash for 3 times alternately to alert you when any push button is activated.
